Preventative Maintenance and Cleaning

Periodic maintenance is essential for safe and proper operation of the Smart Agitation System. Replace worn components immediately.

Dumping and Cleaning:

• Turn off and unplug the unit before cleaning.
• Wipe down the exterior with a damp cloth.
• Do not use harsh chemicals or abrasive materials.
• Close the drain valve and verify the containment cart is in place with the valve closed.
• Press the Auto icon on the touchscreen and select 'Yes' to switch to manual mode.
• In manual mode, press the lower portion of the Agitation tank icon to prompt the door to open.
• Select 'Yes' when prompted to confirm door open action. Allow the biomass to slide into the containment cart.
• Use the integrated sprayer balls to rinse the agitation tank, door, and door seal.
• Close the door and begin the next batch.
• Between Washes: Spray down the walls and floor of the SAS.
• End of Day: Run a cleaning cycle with water and isopropyl alcohol (or ethanol).
• Regular Maintenance: Inspect for wear and replace components as needed.

Inspecting the Unit:

• Regularly check for any signs of wear or damage.
• Ensure all connections are secure.

Storage:

• Store the unit in a cool, dry place when not in use.

Pro Tip:

• If no other processing is scheduled, leave the agitation door open until the next operation.
• Pre-soak material before washing to save time.
• Pre-freeze trays to manage excess freshly washed hash.