No Similar Products
Menu
Shop
Filter
More
Category
Brand
Default USD pricelist
en
Disclaimer & Warning

Disclaimer & Warning


  • DISCLAIMER: THIS PRODUCT REQUIRES A HARDWIRE CONNECTION TO A HYDRAULIC PUMP. BOTH THE ROSIN MACHINE V3.2 / V3.3 AND THE HYDRAULIC PUMP MUST BE STAY SECURELY MOUNTED.
  • DISCLAIMER: THIS PRODUCT OPERATES UTILIZING A HYDRAULIC PUMP AND HYDRAULIC CYLINDER.
  • DISCLAIMER: YOUR MACHINES AND PUMP HAVE INDIVIDUAL POWER SUPPLY(S). THE MACHINE AND PUMP, BOTH BE CONNECTED TO INDIVIDUAL POWER OUTLET(S) TO OPERATE.
  • DISCLAIMER: CONNECTING TO ANY OTHER POWER SOURCE OTHER THAN WHAT YOUR MACHINE IS RATED FOR ON ITS SERIAL LABEL WILL VOID YOUR WARRANTY.
  • WARNING: THIS PRODUCT IS TOP HEAVY WHICH MAKES IT DANGEROUS TO TAKE UP OR DOWN STAIRS OR CHANGE FLOOR LEVELS.
  • WARNING: HEAT PLATES CAN RANDOMLY HEAT UP. CHECK TEMPS BEFORE OVERHEATING.
  • WARNING: HEAT PLATES CAN CAUSE SERIOUS BURNS. NEVER PLACE FOREIGN OBJECTS, FINGERS, HANDS OR OTHER BODY PARTS ON OR BETWEEN THE HEAT PLATES.
  • WARNING: PINCH POINT CAN CAUSE SERIOUS INJURY. NEVER PLACE FOREIGN OBJECTS, FINGERS, HANDS OR OTHER BODY PARTS ON OR BETWEEN THE HEAT PLATES.
  • WARNING: ALWAYS WEAR EYE AND EAR PROTECTION AS WELL AS HEAT RESISTANT GLOVES FOR SAFE OPERATION.
  • WARNING: ACCESS ROSIN®, INC. IS NOT RESPONSIBLE FOR INJURY OR LOSS DUE TO IMPROPER USE OF EQUIPMENT.
  • WARNING: EXCEEDING 3,000PSI ON YOUR MACHINE WHEN RAISING/LIFTING THE HEAT PLATES WILL TERMINATE YOUR WARRANTY. A CYLINDER BLOW OFF VALVE WILL EXHAUST FLUID, AND YOUR MACHINE WILL INDICATE THE OVERPRESSURE FAULT.
  • WARNING: ONLY USE THE DESIGNATED AC POWER PLUG PROVIDED WITH YOUR MACHINE. USING ALTERNATE VOLTAGES OTHER THAN SPECIFIED CAN RESULT IN DAMAGE TO YOUR UNIT.
  • WARNING: IF THE HEAT PLATE ICON ON YOUR SCREEN IS RED OR ON THEN THE PLATES ARE HOT ENOUGH TO CAUSE BURNS.
  • WARNING: PARCHMENT PAPER POUCHES ARE TO BE INSERTED AND RETRIEVED WITH A TOOL.
  • WARNING: EMERGENCY STOP BUTTON - YOU MAY CANCEL THE OPERATION AT ANY POINT BY PRESSING THE EMERGENCY STOP BUTTON. THIS WILL DISPLAY EMERGENCY STOP ON THE TOUCH SCREEN AND WILL CUT POWER TO THE HEATERS WHILE RETRACTING THE HYDRAULIC CYLINDER. NOTE: POWER SUPPLY TO THE PUMP AND MACHINE IS REQUIRED FOR THE CYLINDER TO RETRACT. DISCONNECTING THE POWER SUPPLY PRIOR TO PRESSING THE EMERGENCY STOP BUTTON WILL NOT RETRACT THE PRESS. TO CLEAR THE EMERGENCY STOP, TWIST THE BUTTON TO RELEASE. THIS WILL REBOOT THE SYSTEM AND RETURN YOU TO THE HOME PAGE. THE HEATERS WILL BE OFF AT THIS POINT.
  • WARNING: DO NOT PRESS ANYTHING OTHER THAN SOFT PLANT MATERIALS IN THE ROSIN MACHINE V3.2, OR THE ROSIN MACHINE V3.3. PRESSING OTHER OBJECTS WILL VOID THE WARRANTY.
  • WARNING: WHEN USING ISOPROPYL ALCOHOL TO CLEAN THE HEAT PLATES THE POWER SHOULD BE DISCONNECTED, AND THE HEAT PLATES SHOULD BE AT ROOM TEMPERATURE. ALWAYS WEAR GLOVES AND EYE PROTECTION.