Operation

Starting Temperatures:

• Water Temperature: Maintain between 28°F and 32°F using the smart heat exchanger.
• Ice: Use a 1:4 or 1:5 ratio of ice to water if not utilizing the ice-less package.

Chiller:

• Turn on the system's chiller 1 hour prior to extraction. Set temperature between 28°F to 32°F.

Starting the System:

• Turn the power button to turn on the unit.
• Use the control panel to navigate through the menu options.
• Ensure a 120 psi air supply is connected to the Smart Agitator air regulator.
• Turn the blue ON/OFF valves on the Agitation tank and R.O. Tank to the ON position.
• Verify the input water supply is connected and on.
• Press the R.O. fill icon to fill the R.O. chill tank until the automated cut-off point.
• Press the Chiller icon on the main screen to activate chiller valves.
• Press the recirculation icon on the R.O. tank to start recirculation and set the pump to 50.
• Verify the dump valve is closed.
• Verify R.O. temperature is at 32°F or below.